T Slot Led Heatsink
2021年11月24日Register here: http://gg.gg/x0g4u
*Round Led Heatsink
*Passive Led Heatsinks
*Led Light Heatsink
It’s Slim:
*MakersLED was founded in 2011 to make LED fixtures easier to build. Before MakersLED, our team built one of the first LED fixtures for the aquarium market.
*T-Slot Design: The t-slot design makes positioning and mounting LEDs easy, additionally the t-slots make it simple to replace or reconfigure the location of LEDs. Specifically, the t-slot channels allow a nut to slide in and attached to a screw and washer for securing each LED to the heatsink.
T-Slots for Ease of Use and Flexibility MakersHEATSINK SLIM uses “t”-slots for ease of LED mounting and re-configuring (patented and pending). Why be locked into a particular LED package, color spectrum, or vendor when you don’t have to? Led Aluminum Heat Sink,Aluminum Extrusion Led Heatsink, Find Complete Details about Led Aluminum Heat Sink,Aluminum Extrusion Led Heatsink,Aluminum Extrusion Led Heatsink,Led Aluminum Heat Sink,Led Heatsink from Aluminum Profiles Supplier or Manufacturer-Zhangjiagang Dayang Aluminium Industry Co., Ltd.
*1.5 inches thick, 6.2 inches Wide
*thermally optimized, 392 square inches total surface area per foot
*6063 heatsink grade aluminum
*tempered and anodized for durability
*black anodized for improved heat radiation
*7 lanes of LED mounting area
The Kit Includes:
*cut to length heat sink housing
*black anodized to protect finish and improve radiant heat transfer
*1/16″ [1.5mm] clear acrylic splash guard
*two plastic end caps [injection moulded ABS plastic]
*stainless steel assembly hardware [on exposed parts]
*4-40 screws and nuts, enough for 25 LED’s [per 12”]*
*nylon washers, enough for 25 LED’s [per 12”]*
*nano fixtures (6″) include enough hardware for 12 LEDs, 18” fixtures include enough hardware for 37 LEDs.
The Right Sizes:
6 inches to 6 feet: the most length options in the industry
Standard lengths include: Slots of vegas casino free download.
*0.5ft / 6in “Nano” (15.2 cm)
*1ft (30.5 cm)
*1.5ft (45.7 cm)
*2ft (61 cm)
*3ft (91.4 cm)
*4ft (121.9 cm)
*6ft (182.9 cm)
t-Slots for Ease of Use and Flexibility
MakersHEATSINK SLIM uses “t”-slots for ease of LED mounting and re-configuring (patented and pending).
Why be locked into a particular LED package, color spectrum, or vendor when you don’t have to?
Why use screws? Screws help reduce the thermal resistance of your LEDs – by increasing contact pressure with the heatsink, keeping LEDs cooler.
How Many LEDs?
The kit includes enough hardware to mount 25 LEDs per foot. The heatsink has enough area to mount ~85 star LEDs/foot, but it is not practical to keep this many LEDs cool in such a small area.
Casino movie ending scene. MakersHEATSINK SLIM is a solid extruded piece aluminum with no large milled out fan pockets or thermal voids.
A 1 foot SLIM heatsink in open air will cool approximately:
*33 watts of LEDs with no fan
*85 – 100 watts of LEDs with a Fan
*Example: One Lumia 5.2 @ 70W will run at a cool temperature of 85F [29C] on the backside of the the heatsink (with a fan)
If you need more cooling power, check out the heavier duty classic MakersHEATSINK.
Options (Sold Separately)
*Fan Cover 3D Model for 3D Printing Available here)
*LED Driver (Compatible with the MakersDRIVER 5UP PRO)
By Makers for Makers: 3D Printable Models
Welcome to the future. The 3D models to our plastic parts available for you to download and 3D print yourself.
*3D Models Available for all Plastic Parts are Available Here.
*3D Models of the Heatsink are Available Here for your Planning Purposes.
Made in the USA
It is unusual these days, but we extrude our heatsink products right here in the USA. Americans extrude, cut, QC, and box every single MakersHEATSINK kit.
MakersHEATSINK SLIM
Photo Gallery
.
MakersHEATSINK is Patented and Patent Pending 0.00 Ounces Calculated at checkout
Product Description
**Please note, the larger lengths (48’ and 72’ are custom and have an extended delivery time)
MakersLED is the only heatsink kit on the market that will give your DIY LED fixture a professional finished look. The unique t-slot features allow easy installation of LED’s and mounting. Its ability to be reconfigured allows you to tune in your light fixture according to your taste, needs, and budget at any time.
Included in the kit:
*heat sink housing - Anodized
*acrylic splash guard
*two plastic end caps
*four upper t-slot plugs
*92mm fan 12V [one per 12”]*
*92mm fan cover[one per 12”]
*stainless steel assembly hardware [on exposed parts - used to mount plastics]
*4-40 screws and nuts, enough for 25 LED’s [per 12”]*
*nylon washers, enough for 25 LED’s [per 12”]**The fans need basic 12v DC power. To power them you can use: Power Supplies + Adapter
*nano fixtures (6’) include enough hardware for 12 LEDs. Please note: There are no hanging kits or dowels provided with these kits.International Shipments: We ship these kits worldwide except for the 72’ version. For custom international shipping, please contact us at support@ledgroupbuy.comHow does it go together? See: http://makersled.com/?page_id=2#howtoFAQ: http://makersled.com/?page_id=24
Want to play with the 3D model in Google Sketchup? Find it here: http://sketchup.google.com/3dwarehouse/search?q=makersled&styp=m&scoring=t&btnG=SearchNeed additional mounting hardware or fan? Find it here: MakersLEDTo power the fans you can find power supplies here: Power Supplies + AdapterNeed a good way to dim your drivers? Find it here: MakersLED Dimming BarPlease note you do not need additional fan because the kit comes with a fanRound Led HeatsinkPlease note you do not need additional way to ’protect’ the LEDs because the kit comes with an acrylic splash guardpatent pendingProduct VideosTop grade professional looking heatsink for DIY CREE LED lighting mainly designed for aquariums. www.LEDGroupBuy.com
*DIY LED Heatsi..Top grade professional looking heatsink for DIY CREE LED light..
*CREE Lumia 5.2..We took a Lumia 5.2 and used a FLIR to get heat distribution l..Product VideosReviewsPassive Led Heatsinks
There are 25 review(s) for MakersLED Designer Heatsink Kit - Professional Grade - Anodized
Showing reviews 1-10 of 25| Next »
* AMAZING AND PROFESSINNAL
by jerôme – 1st Jul 2016
I just receive my heatsink 36 inch in france and the quality of extruction is good. The price is correct. When I received it I did not pay tax. It’s the best from market, in France I could not find similar products at this price. I definitely recommend this kit .
Thank you to allow people to be shipped around the world
*
Thick aluminum, clean lines.
I am impressed at the quality for the price i will use these heatsinks for all my future builds.
* A beautifully engineered heatsink but needs better packing.
by Brian Brigg – 26th Jan 2015
I just received my 36 inch heat sink and the quality of the extrusion is superb with a nice anodized finish. Nuts slide in easily and the The end cuts are very smooth with only one very small piece of flashing to be removed from a channel. The unit is surprisingly heavy until you look at the thickness of the extrusion which speaks to solidity.
The only problem is that, despite the nice box used for shipping rough handling in transit bent the lower corners in making the end caps impossible to install without some metal surgery which marred the finish slightly.
I would suggest making some strong plastic end caps or else thick foam molded to shape with end pieces and middle pieces though this would increase the size of the box and probably the shipping cost which is not inconsiderable for me as an expat.
One thing that I would love to see is an option for temperature controlled PWM fans with a power supply. I have ordered some PWM ball bearing fans and an eBay Arduino Uno to build my own but i would have been happy to pay extra for this from the manufacturers.
*
From the images, and I guess just my mental image of the unit, I envisioned something more like 2 inches tall by 4 inches wide, and very light. Instead I got a huge bulky mass of aluminium, almost 10lbs and more like 4 inches tall by 7 inches wide. Not at all slim profile I wanted over my tank. Turns out I wasted +150CAD for a 24’ unit, that i’m not gonna use. Building a custom acrylic unit similar in style to the Radion’s instead.
The system looks great, and if you know what you’re getting, and expect it, it could be a great unit, its just not what I thought it was, and is not at all what I’m looking for.
* Best value, repeat buyer
by DSwanO – 14th Dec 2014
You absolutely cannot beat this heatsink for the buck! I have two of the 6’ sinks over my nano. The are packed with LEDs and don’t even get warm. I recently purchased another to have over my new frag tank. Good quality.
* Best value, repeat buyer
by DSwanO – 14th Dec 2014
You absolutely cannot beat this heatsink for the buck! I have two of the 6’ sinks over my nano. The are packed with LEDs and don’t even get warm. I recently purchased another to have over my new frag tank. Good quality.
*
Did a lot of research before hand and this is defiantly the best on the market
* No other Heat sink kit comes close
by william – 8th Apr 2014
I looked at a lot of other heat sinks available on the market before I finally pulled the trigger on the 72’ Makers Heat sink kit. I’m glad I did. No other manufacturer offers a heat sink kit this long with 6 cooling fans and associated led mounting hardware included. Assembly was easy, thanks to having all the needed parts within easy reach. The provided fans are high quality and nearly silent in their operation. I definitely recommend this kit to anyone who’s looking for a quality kit.
* Excellent for professional-looking DIY projects
by Brian K – 27th Mar 2014
This product really goes a long way towards allowing DIYers to create professional-looking, robust and durable LED enclosures. I’ve used it for multiple projects and keep coming back to it when new ideas arise :-)
*
Well what can I say this heat sink is probably the best thing I have bought for my LEDs, it’s cool to touch and the led stars are cool as a result so the lifespan and output will remain good. I’m running over 60 LEDs on the 18’ kit so I’m very happyLed Light Heatsink
Showing reviews 1-10 of 25| Next »
Register here: http://gg.gg/x0g4u
https://diarynote-jp.indered.space
*Round Led Heatsink
*Passive Led Heatsinks
*Led Light Heatsink
It’s Slim:
*MakersLED was founded in 2011 to make LED fixtures easier to build. Before MakersLED, our team built one of the first LED fixtures for the aquarium market.
*T-Slot Design: The t-slot design makes positioning and mounting LEDs easy, additionally the t-slots make it simple to replace or reconfigure the location of LEDs. Specifically, the t-slot channels allow a nut to slide in and attached to a screw and washer for securing each LED to the heatsink.
T-Slots for Ease of Use and Flexibility MakersHEATSINK SLIM uses “t”-slots for ease of LED mounting and re-configuring (patented and pending). Why be locked into a particular LED package, color spectrum, or vendor when you don’t have to? Led Aluminum Heat Sink,Aluminum Extrusion Led Heatsink, Find Complete Details about Led Aluminum Heat Sink,Aluminum Extrusion Led Heatsink,Aluminum Extrusion Led Heatsink,Led Aluminum Heat Sink,Led Heatsink from Aluminum Profiles Supplier or Manufacturer-Zhangjiagang Dayang Aluminium Industry Co., Ltd.
*1.5 inches thick, 6.2 inches Wide
*thermally optimized, 392 square inches total surface area per foot
*6063 heatsink grade aluminum
*tempered and anodized for durability
*black anodized for improved heat radiation
*7 lanes of LED mounting area
The Kit Includes:
*cut to length heat sink housing
*black anodized to protect finish and improve radiant heat transfer
*1/16″ [1.5mm] clear acrylic splash guard
*two plastic end caps [injection moulded ABS plastic]
*stainless steel assembly hardware [on exposed parts]
*4-40 screws and nuts, enough for 25 LED’s [per 12”]*
*nylon washers, enough for 25 LED’s [per 12”]*
*nano fixtures (6″) include enough hardware for 12 LEDs, 18” fixtures include enough hardware for 37 LEDs.
The Right Sizes:
6 inches to 6 feet: the most length options in the industry
Standard lengths include: Slots of vegas casino free download.
*0.5ft / 6in “Nano” (15.2 cm)
*1ft (30.5 cm)
*1.5ft (45.7 cm)
*2ft (61 cm)
*3ft (91.4 cm)
*4ft (121.9 cm)
*6ft (182.9 cm)
t-Slots for Ease of Use and Flexibility
MakersHEATSINK SLIM uses “t”-slots for ease of LED mounting and re-configuring (patented and pending).
Why be locked into a particular LED package, color spectrum, or vendor when you don’t have to?
Why use screws? Screws help reduce the thermal resistance of your LEDs – by increasing contact pressure with the heatsink, keeping LEDs cooler.
How Many LEDs?
The kit includes enough hardware to mount 25 LEDs per foot. The heatsink has enough area to mount ~85 star LEDs/foot, but it is not practical to keep this many LEDs cool in such a small area.
Casino movie ending scene. MakersHEATSINK SLIM is a solid extruded piece aluminum with no large milled out fan pockets or thermal voids.
A 1 foot SLIM heatsink in open air will cool approximately:
*33 watts of LEDs with no fan
*85 – 100 watts of LEDs with a Fan
*Example: One Lumia 5.2 @ 70W will run at a cool temperature of 85F [29C] on the backside of the the heatsink (with a fan)
If you need more cooling power, check out the heavier duty classic MakersHEATSINK.
Options (Sold Separately)
*Fan Cover 3D Model for 3D Printing Available here)
*LED Driver (Compatible with the MakersDRIVER 5UP PRO)
By Makers for Makers: 3D Printable Models
Welcome to the future. The 3D models to our plastic parts available for you to download and 3D print yourself.
*3D Models Available for all Plastic Parts are Available Here.
*3D Models of the Heatsink are Available Here for your Planning Purposes.
Made in the USA
It is unusual these days, but we extrude our heatsink products right here in the USA. Americans extrude, cut, QC, and box every single MakersHEATSINK kit.
MakersHEATSINK SLIM
Photo Gallery
.
MakersHEATSINK is Patented and Patent Pending 0.00 Ounces Calculated at checkout
Product Description
**Please note, the larger lengths (48’ and 72’ are custom and have an extended delivery time)
MakersLED is the only heatsink kit on the market that will give your DIY LED fixture a professional finished look. The unique t-slot features allow easy installation of LED’s and mounting. Its ability to be reconfigured allows you to tune in your light fixture according to your taste, needs, and budget at any time.
Included in the kit:
*heat sink housing - Anodized
*acrylic splash guard
*two plastic end caps
*four upper t-slot plugs
*92mm fan 12V [one per 12”]*
*92mm fan cover[one per 12”]
*stainless steel assembly hardware [on exposed parts - used to mount plastics]
*4-40 screws and nuts, enough for 25 LED’s [per 12”]*
*nylon washers, enough for 25 LED’s [per 12”]**The fans need basic 12v DC power. To power them you can use: Power Supplies + Adapter
*nano fixtures (6’) include enough hardware for 12 LEDs. Please note: There are no hanging kits or dowels provided with these kits.International Shipments: We ship these kits worldwide except for the 72’ version. For custom international shipping, please contact us at support@ledgroupbuy.comHow does it go together? See: http://makersled.com/?page_id=2#howtoFAQ: http://makersled.com/?page_id=24
Want to play with the 3D model in Google Sketchup? Find it here: http://sketchup.google.com/3dwarehouse/search?q=makersled&styp=m&scoring=t&btnG=SearchNeed additional mounting hardware or fan? Find it here: MakersLEDTo power the fans you can find power supplies here: Power Supplies + AdapterNeed a good way to dim your drivers? Find it here: MakersLED Dimming BarPlease note you do not need additional fan because the kit comes with a fanRound Led HeatsinkPlease note you do not need additional way to ’protect’ the LEDs because the kit comes with an acrylic splash guardpatent pendingProduct VideosTop grade professional looking heatsink for DIY CREE LED lighting mainly designed for aquariums. www.LEDGroupBuy.com
*DIY LED Heatsi..Top grade professional looking heatsink for DIY CREE LED light..
*CREE Lumia 5.2..We took a Lumia 5.2 and used a FLIR to get heat distribution l..Product VideosReviewsPassive Led Heatsinks
There are 25 review(s) for MakersLED Designer Heatsink Kit - Professional Grade - Anodized
Showing reviews 1-10 of 25| Next »
* AMAZING AND PROFESSINNAL
by jerôme – 1st Jul 2016
I just receive my heatsink 36 inch in france and the quality of extruction is good. The price is correct. When I received it I did not pay tax. It’s the best from market, in France I could not find similar products at this price. I definitely recommend this kit .
Thank you to allow people to be shipped around the world
*
Thick aluminum, clean lines.
I am impressed at the quality for the price i will use these heatsinks for all my future builds.
* A beautifully engineered heatsink but needs better packing.
by Brian Brigg – 26th Jan 2015
I just received my 36 inch heat sink and the quality of the extrusion is superb with a nice anodized finish. Nuts slide in easily and the The end cuts are very smooth with only one very small piece of flashing to be removed from a channel. The unit is surprisingly heavy until you look at the thickness of the extrusion which speaks to solidity.
The only problem is that, despite the nice box used for shipping rough handling in transit bent the lower corners in making the end caps impossible to install without some metal surgery which marred the finish slightly.
I would suggest making some strong plastic end caps or else thick foam molded to shape with end pieces and middle pieces though this would increase the size of the box and probably the shipping cost which is not inconsiderable for me as an expat.
One thing that I would love to see is an option for temperature controlled PWM fans with a power supply. I have ordered some PWM ball bearing fans and an eBay Arduino Uno to build my own but i would have been happy to pay extra for this from the manufacturers.
*
From the images, and I guess just my mental image of the unit, I envisioned something more like 2 inches tall by 4 inches wide, and very light. Instead I got a huge bulky mass of aluminium, almost 10lbs and more like 4 inches tall by 7 inches wide. Not at all slim profile I wanted over my tank. Turns out I wasted +150CAD for a 24’ unit, that i’m not gonna use. Building a custom acrylic unit similar in style to the Radion’s instead.
The system looks great, and if you know what you’re getting, and expect it, it could be a great unit, its just not what I thought it was, and is not at all what I’m looking for.
* Best value, repeat buyer
by DSwanO – 14th Dec 2014
You absolutely cannot beat this heatsink for the buck! I have two of the 6’ sinks over my nano. The are packed with LEDs and don’t even get warm. I recently purchased another to have over my new frag tank. Good quality.
* Best value, repeat buyer
by DSwanO – 14th Dec 2014
You absolutely cannot beat this heatsink for the buck! I have two of the 6’ sinks over my nano. The are packed with LEDs and don’t even get warm. I recently purchased another to have over my new frag tank. Good quality.
*
Did a lot of research before hand and this is defiantly the best on the market
* No other Heat sink kit comes close
by william – 8th Apr 2014
I looked at a lot of other heat sinks available on the market before I finally pulled the trigger on the 72’ Makers Heat sink kit. I’m glad I did. No other manufacturer offers a heat sink kit this long with 6 cooling fans and associated led mounting hardware included. Assembly was easy, thanks to having all the needed parts within easy reach. The provided fans are high quality and nearly silent in their operation. I definitely recommend this kit to anyone who’s looking for a quality kit.
* Excellent for professional-looking DIY projects
by Brian K – 27th Mar 2014
This product really goes a long way towards allowing DIYers to create professional-looking, robust and durable LED enclosures. I’ve used it for multiple projects and keep coming back to it when new ideas arise :-)
*
Well what can I say this heat sink is probably the best thing I have bought for my LEDs, it’s cool to touch and the led stars are cool as a result so the lifespan and output will remain good. I’m running over 60 LEDs on the 18’ kit so I’m very happyLed Light Heatsink
Showing reviews 1-10 of 25| Next »
Register here: http://gg.gg/x0g4u
https://diarynote-jp.indered.space
コメント